Payment & Shipping Terms:
|Media:||Hot Water, Compressed Air, Water, Oil||Medium Temperature:||VITON Seal: -30℃ To 150℃|
|Pressure:||0.03Mpa ~ 5.0Mpa||Material:||Brass|
solenoid pilot valve,
diaphragm pulse valves
Pilot diaphragm type high pressure pneumatic solenoid valve 5 mpa normally open
1. High pressure solenoid valve with Pilot operated
diaphragm construction for compress air
machine, injecting plastic machine
2. With PARKER seals to improve the quality
Medium: Hot Water, Compressed Air, Water, Oil
Temperature: VITON Seal: -30℃ to 150℃
Pressure: H11: 0.03Mpa ~ 5.0Mpa, Normally Closed
H12: 0.03Mpa ~ 5.0Mpa, Normally Open
Port Size: 3/8", 1/2", 3/4"
Port Thread: BSPP, BSPT, NPT, FLANGE
Orifice (mm): 15
Voltage: DC - 12V, 24V
AC - 24V, 120V, 240V/60HZ; 110V, 220V/50HZ
Tolerance: +/- 10%
Coils: S91B, 22VA(AC), 17W(DC), Ip65, 100%ED
NASS COIL 0543 on request
Material: Body - Brass /SUS304
Armature Tube - Stainless Steel 304
Plunger - Stainless Steel 430F
Springs - SS 304
Shading Rings - Copper
1: Various style for each products and completely series auto parts products for you to choose from.
2: Large stock for fast shipping.
3: High quality with competitive price
4: Sample order & small quantity order is ok
5:Customize according to your special demand.
6: Provide free products information.
7. Reliable quality assured and active after-sell service
Feel free to contact us at anytime if you have any problems or questions on your purchase. We will resolve any problems such as damaged, not as described, missing parts, and lost items. All emails will be replied within 24 hours except Saturday. & Sunday and Chinese holidays. If you have any other requirements or questions, welcome to visit our website, or just contact with us directly. Thank you!
1. attention to check the use of components, in the transport process is damaged, and then install the use of.
2. When installing, please note that the gas flow direction and the takeover are correct.
3. when using, please strictly comply with the technical requirements, such as the operating voltage, operating frequency, working pressure, the use of temperature, the whole machine debugging, it is recommended to use a manual device debugging, and then through power debugging.
4. Please pay attention to dust, it is recommended to install the exhaust port or muffler muffler throttle.
5. When connecting pipe, pay attention to only release the strap around the joint may not exceed the end face of the tooth, and pay attention to the elimination of pipe fittings, metal particles inside the pipe, dust and oil, etc